Chevron shingle oil msds. Shingle Oil [5 2022-10-14

Chevron shingle oil msds Rating: 5,2/10 717 reviews

A Material Safety Data Sheet (MSDS) is a document that provides important information about a chemical substance or mixture, including its physical and chemical properties, potential hazards, and handling and emergency procedures. MSDSs are used by employers, workers, and emergency responders to ensure the safe handling and use of hazardous materials.

Chevron Shingle Oil is a product used to protect and preserve the life of wood shingles and shakes. According to the MSDS for Chevron Shingle Oil, the product is a clear, amber-colored liquid that is composed mainly of petroleum-based oils and solvents. It has a strong, distinctive smell and is flammable.

The MSDS for Chevron Shingle Oil lists several potential hazards associated with the product. It is classified as a flammable liquid, which means it can ignite easily and burn rapidly. Inhaling the vapors produced by the product can cause headaches, dizziness, and other symptoms. Skin contact with the product can cause irritation, and it may be harmful if ingested.

To use Chevron Shingle Oil safely, the MSDS recommends wearing protective clothing, including gloves and eye protection. The product should be used in a well-ventilated area to minimize the risk of inhaling vapors. It should also be kept away from heat sources and flames, as it is flammable.

In the event of an accidental spill or leak, the MSDS recommends taking the following precautions:

In case of skin contact with Chevron Shingle Oil, the MSDS recommends washing the affected area thoroughly with soap and water. If the product gets in the eyes, rinse them with water for at least 15 minutes and seek medical attention if irritation persists. If the product is ingested, do not induce vomiting and seek medical attention immediately.

In summary, Chevron Shingle Oil is a product used to protect and preserve wood shingles and shakes. It is flammable and can cause irritation upon skin contact. To use the product safely, it is important to follow the handling and emergency procedures outlined in the MSDS.

Chevron Shingle Oil

chevron shingle oil msds

The roof should be hosed with water 24 hours prior to application to lessen the possibility of over application. Although Chevron Shingle Oil retards the aging process, it will not renew wood that is already weather damaged. Be sure to find out what safety or health restrictions may apply to these additives. Description Chevron shingle oil is designed for use on shake roofs, log homes, wood siding, and fences. Do not walk on treated surfaces — Chevron Shingle Oils a petroleum oil and is slippery. Chevron Shingle Oil may be applied by brushing or spraying.


Next

Chevron Shingle Oil MSDS

chevron shingle oil msds

Chevron Shingle Oil penetrates the wood surface to enhance or replace natural oils and resins leached out by cyclical exposure to sun and rain. Application rate depends on the type of wood and the rate at which the oil saturates the wood. . Chevron Shingle Oil is a straw colored, low viscosity oil designed for use as a shingle or shake dressing for shake roofs, wooden fencing, wood siding, and log homes. Alternatively, a licensed contractor can power wash the roof thereby removing weather damaged wood, allowing oil to absorb into new wood.

Next

CHEVRON SHINGLE OIL (5 gallon pail)

chevron shingle oil msds

Do not add color pigments — as they will lump and settle out. Do not use on flat surfaces, such as decks. The typical application rate is 150-300 square feet per gallon. Properly licensed contractors may add certain chemicals, such as antifungal agents and other substances, to Chevron Shingle Oil. . . .

Next

Shingle Oil [5

chevron shingle oil msds

. . . . .

Next

chevron shingle oil msds

. . . . . .

Next

chevron shingle oil msds

. . . . . . .

Next

chevron shingle oil msds

. . . . . .

Next

chevron shingle oil msds

. . . . . . .

Next